• Welcome! You will have to REGISTER a free account, before you can access the system. If you already registered, please LOG IN. (top right)
    If you can't remember your password, CLICK HERE to reset it. If you have questions, feel free to click the CONTACT US link at the bottom of this page.

Question Mount poster on acrylic?

Vermont Hardwoods solid wood picture frame molding

Melinda Tennis

CGF II, Certified Grumble Framer Level 2
Forum Donor
Thread starter
Joined
Jul 10, 2002
Messages
385
Location
Lynchburg, VA.
Business
Melinda's
Can I mount a poster on an acrylic sheet? Do I use Laminall, Fusion 4000 or don't do it?
 

David Hewitt

MGF, Master Grumble Framer
Joined
Feb 26, 2009
Messages
545
Location
Tennessee 931-202-2433
Can I mount a poster on an acrylic sheet? Do I use Laminall, Fusion 4000 or don't do it?
Don't know about Laminall, but assume it will work. I have done this using Franks Fabric Adhesive with good results. As always with any slick surface, sand it first. Prime with thin coat, then second coat for a good bond.
Note, Fusion requires 200 degrees, will most likely affect acrylics.
 

Melinda Tennis

CGF II, Certified Grumble Framer Level 2
Forum Donor
Thread starter
Joined
Jul 10, 2002
Messages
385
Location
Lynchburg, VA.
Business
Melinda's
Thanks David. I hope to get some more info. I think I'll hunt the archives.
 
FrameReady Special Offer - Call 888-281-2202
Top