Gloss/Lacquer Frame Miters

[kgart]

Does anyone have any tips on filling corners for white gloss frames? I'm using both Omega and Roma 1-1/2" frames and my corners are good but they aren't perfect. I found a video online of someone using a pen like tool for painting the corners but I have no idea what it is. Any help would be appreciated!

 

[Rick Granick]

White gloss acrylic enamel craft paint and a good brush should take care of it for you.

 

[MnSue]

try TESTORS paints, used for modeling crafts

 

[cvm]

We use DecoArt Maxx Gloss.

 

[Larry Peterson]

CCPaste also works well https://ccpaste.com/

 

[Joe B]

This is what I use. It is a pigmented round tip pen.

 

[Jim Miller]

Good suggestions above., and here's another idea: use a tiny smear of white bathroom caulking. It's cheap & readily available, water-soluble until dry, fills gaps smoothly, retains its original color & chemistry (mostly), and dries to a matte finish. Also, it contains no abrasives, which could make a matte-white moulding finish appear shiny if you rub a bit too much.

 

[kgart]

Thank you all. I've ordered almost everything from the suggestions above and will report back what worked the best!

 

[kgart]

I ended up going with CJ paste. I should also note I stopped using the gloss frames as my customers preferred a white matte instead. But the paste works perfectly on both! I ordered a white and a black and was even able to mix them to touch up corners of a matte black frame as well.