Zund M-800cv

Create a Post
O

OVoXO

Grumbler in Training
Joined
Jul 25, 2007
Posts
2
Hello,
A friend told me to come here with this item I am trying to sell because it may benefit somebody that does framing/matting.I have a Zund M-800cv that is in very nice shape that I am trying to get rid of. There is nothing wrong with it, it works perfect. Attatched are some pictures. I am entertaining offers. New this machine cost over $50k. I have a version of I-cut that goes with it, that is VERY easy to use. I want this to goto somebody that will be able to use it instead of it sitting in my basement idle.
Please email be back very soon because I have to get rid of it quick!

Email me for more info or to make an offer I cant refuse. Thanks alot.
Joe Downard
Joe@downards.com
 

Attachments

  • IMG_1525.JPG
    IMG_1525.JPG
    1.5 KB · Views: 176
  • IMG_1541.JPG
    IMG_1541.JPG
    1.5 KB · Views: 167
  • IMG_1544.JPG
    IMG_1544.JPG
    1.8 KB · Views: 163
  • IMG_1545.JPG
    IMG_1545.JPG
    1.4 KB · Views: 164
where r u located???????????? how much it weigh???????? demensions??????
get it fixed in US??????? via what company(s)???? min PRICE ????? u pack/ship?????


all very important info!
 
Last edited:
Everything about this machine can be found on Zund.com which is the maker of this machine. It weighs probably 500? pounds. It is approximately 6 ft by 8 ft. I am located in Southeast Michigan. There is nothing that needs to be fixed on it. It works perfectly. I can get it shipped, Which will require me taking it somewhere and getting it shipped (you pay). Min price I am trying to get $20,000 and am open to offers. Thanks.
 
I went to Zund.com to fine a little more about this machine and I've got to say it is a very confusing site. I don't see an easy way to search and find this model #.

I would suggest that if you want to sell this machine, that you need to either provide the details or a direct link to their specific web page about this model.
 
Wizard is a Zünd representative for the picture framing industry.
I'm not familiar with their entire line of offerings, but I'll share what I know.

The M-800 offers a working area of 1300mm X 800mm.
It will require at least a 2 meter square of floorspace.
The 800mm dimension can be increased in the electronics to accommodate a full 32" matboard.
A vacuum is used to hold material, so there's no clamping waste.
Depending on the vacuum pump installed, a 3-phase power hookup may be required (check with seller).
From the photo it appears to be a C2 head which has a 1500g cutting pressure which is insufficient for matboard.
A TzP or TzTP head is needed to accomodate the PPT bevel-cutting tool.
Zünd America www.zund.com can help get the cutter configured for matboard.

I'm not familiar with the iCut software, but Wizard offers MatDesigner software for the Zünd cutters (shameless plug).

Dave Becker
Software Engineer
Wizard International
 
Create a Post
Back
Top