Wizard and 8-ply

Mark Rogers

CGF, Certified Grumble Framer
Joined
Dec 22, 2003
Posts
138
Loc
Dallas, TX
I was considering a Wizard for light production mat cutting. I need to know if it can cut 8-ply rag mat well (straight lines, and clean corners).

Thanks,

Mark Rogers
Frame Destination
Dallas, TX
 
Yes, the Wizard 8000 cuts 8-Ply mat. Just make sure that your Blade Depth (both physically and in the software) are the correct depth for clean corners.
 
Removing ONE slip sheet to make room for the thickness of the 8-ply sheet is fine. Just make sure that your Blade Depth is correct for cutting through the 8-ply but not through the one remaining slip sheet.
 
Im sorry I should of rephrased that better. I remove my bottom slip sheet "my second layer" and then cut my 8-ply works great. I agree with Dani and make sure your blade depth is set right, for a great clean cut.
 
Back
Top