Question What are they Called??

Create a Post
Woodworks by John

Woodworks by John

CGF II, Certified Grumble Framer Level 2
Joined
Jul 4, 2000
Posts
342
Loc
North Las Vegas, NV
Business
Retired, work from home shop
I'm thinking of making a small run of photo frames and want to use those inserts in the back that have a leg attached to them so they will stand on a table. What the heck is that called? I'm sure they're available somewhere but since I don't even know what they're called can't search for it.
Bottom line, could someone overcome my brain fart and tell me where I can buy a dozen or so of those "whatchamacallits" -- thanks so much.
 
Woodworks by John said:
I'm thinking of making a small run of photo frames and want to use those inserts in the back that have a leg attached to them so they will stand on a table. What the heck is that called? I'm sure they're available somewhere but since I don't even know what they're called can't search for it.
Bottom line, could someone overcome my brain fart and tell me where I can buy a dozen or so of those "whatchamacallits" -- thanks so much.
Click to expand...

easel backs

http://www.craft-inc.com/
 
And I prefer Easel Mates :

4894.jpg


One of the problems with most Easel Backs is that the drop doesn't work well with anything wider than about a 1" moulding. The frame won't site at the correct angle. I remember some discussion here about it at one time.
 
I agree with Larry. I think Easel Mates are a great invention. They cost a little more, but are well worth it because they are sturdy yet unobtrusive; they are adjustable for optimal angle; they won't wear out and need to be replaced like most easel backs; they don't require any special trim work when fitting; and, they aren't ugly. In fact, I think they add a "touch of class" as a value-added feature.
:cool: Rick
 
Easel Mates for sure..I use lots of them and they are easy and good looking .
 
I love Easel Mates too. We use them a lot when doing custom work. The original poster was talking about making his own photo frames, and while Easel Mates can work for these too I elected to go with plain easel backs because it's easier to switch from horizontal to vertical and it's what people are used to.
 
I personally hate easel mates....... I think they are ugly...
I like the easelback better ..... that way you can move your picture around and possibly hang it on the wall later without to much fuss........ :shrug:
 
blackiris said:
I personally hate easel mates....... I think they are ugly...
I like the easelback better ..... that way you can move your picture around and possibly hang it on the wall later without to much fuss........ :shrug:
Click to expand...

Personally I hate teh Easelback song "Photograph"

Look at this Photo Frame
Everytime I do the backing looks lame
How did that black paper get so red
I think I'll just ignore it and increase my med...
 
Easel Backs, Mates, etc.

Thanks so much I'll check out the links you all gave and go from there
 
I prefer selling table top easels. They look better, and are easily moved, and work well even for larger prints or frames.

I stock a solid brass in about 5 sizes, and then another design that comes in bronze, copper, Iron, and Pewter, and carry them in about 5 sizes.

When someone comes in to see their work, I place the frame on a appropriate easel for viewing. I have sold several this way.

Of course for higher volume, this would probably not work.
 
Easel backs are minor PITA IMHO. :p To do a classy job you really need to make them by hand which can take a lot longer than making the frame.
Heavy backboard - hand cut strut - riveted hinges - nice bit of ribbon as a stay. Velvet covered ones look cool.
Ready-made one tend to wilt on a larger frame. :icon11:

I've made some quick 'n easy stands in a past using 3/4 pse timber. You just need to make two Ls on the Morso and trim the ends to a point (also on the Morso). A little notch on each of the front legs for the frame to slot in - bingo. I held the two Ls together with a little square frame made from the same timber and screwed together. If you are more geared up for woodworking you can make them a bit more decorative, but they take no time at all on the Morso.
You can sell them as plate stands as well. :thumbsup:
 
I like the Easel Mates and if the frame is a little bit large I use 2 of them, one at each bottom corner instead of 1 in the middle for extra support.
 
I make a "foot' for small frames from stainless steel spokes (convenient bicycle shop next door, and they are always throwing away spokes). Either bent into a "U" and inserted into two holes drilled in the bottom rail of the frame (some minor bending required to get frame to tilt backward at proper angle), or with a single piece.
If I use a single piece, I generally create a larger foot on the end by coiling the spoke (not the easiest thing to do, but wrapping around needle-nosed pliers works) and then flattening the coil with a hammer (I have a miniature anvil).
In either case, the easle can be removed rather easlily and stored in a envelope attached to the back of the frame if the customer decides to hang the piece. If the foot gets lost, it is easy enough to replace in a couple minutes.

I have made the fabric covered easel backs, but, as pointed out, they are not cost effective. I use a doubled layer of the gummed linen tape for the hinge (passes through back) and usually cover the whole thing in suedecloth.
 
Wally - what a great idea making frames stand up using bicycle spokes! I am going to trot down the street to my neighborhood bike shop and have them save spokes for me!!!

Thanks! :thumbsup:
 
Create a Post
Back
Top