• Welcome! You will have to REGISTER a free account, before you can access the system. If you already registered, please LOG IN. (top right)
    If you can't remember your password, CLICK HERE to reset it. If you have questions, feel free to click the CONTACT US link at the bottom of this page.
Beauty, Brawn, and Brains: Wizard Z1 CMC

WTB: Used Framing Equipment

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
Vnailer, press, chopper, FT3000/3100, mat cutter, etc.

PM me, please.

Thanks
 

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
No, but you might try using a carpenter's level and add some weight to it for stability.
 

FrameBizInventory

CGF, Certified Grumble Framer
Joined
Oct 15, 2015
Messages
106
Paul, you have a Vnailer for sale? Or you're looking for this equipment? I have a Taurus the just went up, sold 2 Miter Mite's couple years ago, should have kept.

Looking for underpinner.
Charlie
 

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
Sorry Charlie (always wanted to use that line) but I'm not a Taurus fan, but thanks for asking. However, I am looking form equipment.
 
Beauty, Brawn, and Brains: Wizard Z1 CMC

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
No one is near Montana. :) But that's not necessarily a deal killer. And I do have a location in Vegas. It's kind of warm there too.
 

framer

Grumbler in Training
Joined
May 1, 2015
Messages
8
Do you have a Morso Chopper? I'm In UT and I've been looking for a nice used chopper somewhere close-ish to here.

Josh Clare
joshclare.com
Hi Josh, I'm in Colorado Springs, CO I have a Morso chopper for sale, $650 Let me know if you want pictures
 
Vermont Hardwoods solid wood picture frame molding

JMCJMC

Grumbler in Training
Joined
Jan 13, 2018
Messages
1
Hi Josh, I'm in Colorado Springs, CO I have a Morso chopper for sale, $650 Let me know if you want pictures
Hi Framer, I am in NY and would like to consider the Morso if Josh isn't interested. Could you Tie it to a skid safely for transit? I would send a truck to pick it up. If you don't have a means of lifting it on the 18 wheeler, it would make sure there is a lift gate. Let me know.
 

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
Sold
 

Ginny Ward

Grumbler in Training
Joined
Sep 5, 2018
Messages
2
Vnailer, press, chopper, FT3000/3100, mat cutter, etc.

PM me, please.

Thanks
Hi Paul, i am located in mn and have a c&h mat,glass , plastic, cardboard cutter. Modelcn210-48. Clearmount portable shrink pakager,40".cassese c89 pneumatic underpinner. I can send pics and prices if interested. Thanks, Ginny. ginnyglw@gmail.com .
 

Modigity

CGF II, Certified Grumble Framer Level 2
Joined
Aug 25, 2009
Messages
392
Are you still looking for framing equipment? I recently picked up whole frame shop worth of stuff just for the vacu press. If so let me know I can send you a list. I havent been on in a long time but used to be on here quite a bit.
 
FrameReady Special Offer - Call 888-281-2202

Robert Edmonds

Grumbler in Training
Joined
Jun 2, 2017
Messages
4
Are you still looking for framing equipment? I recently picked up whole frame shop worth of stuff just for the vacu press. If so let me know I can send you a list. I havent been on in a long time but used to be on here quite a bit.
Send me a list please.
 

artisan services

Grumbler
Joined
Feb 5, 2006
Messages
18
Vnailer, press, chopper, FT3000/3100, mat cutter, etc.

PM me, please.

Thanks
Hey Paul...Nobu here, not sure if you remember me but i came out from Denver to take your class about 10 years ago or so...Also sold and shipped a Wizard cutter.
I'm finally retiring and moving on...I've got an Eclipse 4060, 2 stage 220 compressor, a CDT dbl mitre saw, AMPF pinner, a few fillet cutters, a 2000 pound paper cutter, 2 C&H matboard racks, flat file, a boat-full of other accessories. Everything in excellent shape and currently operational. can sent images
I'll deliver to you for $8k complete.
 

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
Nobu! Of course I remember you -- our very first student. And only student at that time. I tell your story all the time -- how we had one student and two instructors, and that I almost threw in the towel. No use for the equipment, I'm moving toward selling the school and retiring in the near future. Maybe someone else would be interested.
 

framah

PFG, Picture Framing God
Joined
Mar 15, 2001
Messages
8,814
Hey Paul... I hear Michael's is hiring part time framers!! Maybe you could work a couple days a week just so you don't get bored being "Retired"!!

You could work on the non-sale days!!!:confused::eek::eek::D
 

Larry Peterson

PFG, Picture Framing God
Forum Donor
Resource Provider
Joined
Apr 8, 2003
Messages
8,461
  • Like
Reactions: ALA
Rian Fabrication Services  www.rianfabrication.com

Flintstone

CGF II, Certified Grumble Framer Level 2
Joined
Aug 9, 2003
Messages
252
Hi Everyone:
Selling all my framing stuff. I have a Masterpiece 500T, Fletcher 2100, Fletcher 3000, Nielsen frame corner carousel, a couple of vises, etc.
I also have some metal flat files, a 7 foot light table, and a large hand made shop table too. I also have a couple of metal desks. I am on Long Island. No shipping.
 

carlarocha

Grumbler in Training
Joined
Nov 7, 2019
Messages
1
Hello, Everyone, I am looking for a used Vacuum Press 40x60 I live in the Monterey Bay area, please let me know of anyone that is selling. Thank you
 

neilframer

PFG, Picture Framing God
Forum Donor
Joined
Jan 27, 2010
Messages
8,044
Hello, Everyone, I am looking for a used Vacuum Press 40x60 I live in the Monterey Bay area, please let me know of anyone that is selling. Thank you
Welcome to the Grumble, Carla.
Contact Steve at this website.
www.aimequipmentcompany.com
He has used equipment for sale at a number of locations around the country.
 
Last edited:

Paul Cascio

SGF, Supreme Grumble Framer
Joined
Oct 5, 2006
Messages
4,659
Hey Paul... I hear Michael's is hiring part time framers!! Maybe you could work a couple days a week just so you don't get bored being "Retired"!!

You could work on the non-sale days!!!:confused::eek::eek::D
I could never work for Michaels, but I sure wish I bought some of their stock when it dropped to almost $5 a couple of months ago.
 

artisan services

Grumbler
Joined
Feb 5, 2006
Messages
18
Vnailer, press, chopper, FT3000/3100, mat cutter, etc.

PM me, please.

Thanks
Hey Paul, it's Nobu...maby you remember me...maby not. anyway, I'm wanting to sell or consign everything I have;
Eclipse 4060 maintained by 'the CMCman', a CDT d45 dbl mitre, ITWAMP mitre mite vn-42 v-nailer, ITWAMP sander,
2 fillet cutters, 'Diamond' 2000lb die cutter, Dahle 47" guillotine, 2 Banibridge mat storage bins 37x72, C+H advantage pro 48", pneumatic point driver(s)
xtra boxes of blades for eclipse, moulding if you want it.
I want to sell everything all at once and you are the only person I know who can do that. I'm wanting $6000. I can research the best common carrier and will crate everything, you cover shipping.
if this is of any interest, let me know and I will send images. Thanks, nobu.
 
Register for the picture framer's grumble

artisan services

Grumbler
Joined
Feb 5, 2006
Messages
18
Vnailer, press, chopper, FT3000/3100, mat cutter, etc.

PM me, please.

Thanks
Nobu! Of course I remember you -- our very first student. And only student at that time. I tell your story all the time -- how we had one student and two instructors, and that I almost threw in the towel. No use for the equipment, I'm moving toward selling the school and retiring in the near future. Maybe someone else would be interested.
Ok buddy...I fully understand. be well and don't let them cough in your direction.....
 
Beauty, Brawn, and Brains: Wizard Z1 CMC
Top