kenmccann
True Grumbler
I have a Aut 82 neumatic underpinner I want to sell. This underpinner is for high production. Its been replaced with a new model called the Brevetti c100 which cost about $4500. Its just about the same machine, and all parts are easy to get. Its just to much of a machine for me. I can send a link to the site that sells these machines. You can search by doing "pam underpinner" and then look at the Brevetti c100. I live in Connecticut and this machine is heavy so I would like to sell locally if I could.
Model: Brevetti C100
Price:
$4,523.00
The Brevetti C 100 is the latest generation of the AUT 82. This machine is a coil feed system that can be purchased in two models. One model uses NR, VR, VM corrugated shaped fasteners and the other model uses VC, V-shaped fasteners. It is a manual machine that is simple to use and very durable. Companies running sustained production that don’t require computerized technology are best suited for the C 100. Fasteners on coils allow operators to run continuous production without constantly having to load fasteners in the machine. The mitered pieces of moulding to be joined are connected tightly by a steel staple. These staples are in coils and are available in 4, 5, 6, 8, 10, 12, 14 and 16mm according to the height of moulding. The machine is equipped with a sliding 90&Mac176; fence for manual placement of fasteners in two pre-set positions. The operator can place additional fasteners in between the pre-set positions. The C 100 requires the operator to move the moulding under the nailing head for nail insertion. The C 100 feeds, cuts and drives the nail. Ideal for frame shops producing 500+ frames a week. Joins moulding from 1/4" to 4 3/4" wide by 5/16" to 3" high.
Optional Equipment:
• Cold glue dispenser
• Extension/ side arm tables
• VC nailing head for converting the machine to a V-shaped fastener.
• VM-VR-NR nailing head for the maximum
[ 02-15-2004, 01:58 PM: Message edited by: kenmccann ]
Model: Brevetti C100
Price:
$4,523.00
The Brevetti C 100 is the latest generation of the AUT 82. This machine is a coil feed system that can be purchased in two models. One model uses NR, VR, VM corrugated shaped fasteners and the other model uses VC, V-shaped fasteners. It is a manual machine that is simple to use and very durable. Companies running sustained production that don’t require computerized technology are best suited for the C 100. Fasteners on coils allow operators to run continuous production without constantly having to load fasteners in the machine. The mitered pieces of moulding to be joined are connected tightly by a steel staple. These staples are in coils and are available in 4, 5, 6, 8, 10, 12, 14 and 16mm according to the height of moulding. The machine is equipped with a sliding 90&Mac176; fence for manual placement of fasteners in two pre-set positions. The operator can place additional fasteners in between the pre-set positions. The C 100 requires the operator to move the moulding under the nailing head for nail insertion. The C 100 feeds, cuts and drives the nail. Ideal for frame shops producing 500+ frames a week. Joins moulding from 1/4" to 4 3/4" wide by 5/16" to 3" high.
Optional Equipment:
• Cold glue dispenser
• Extension/ side arm tables
• VC nailing head for converting the machine to a V-shaped fastener.
• VM-VR-NR nailing head for the maximum
[ 02-15-2004, 01:58 PM: Message edited by: kenmccann ]