• Welcome! You will have to REGISTER a free account, before you can access the system. If you already registered, please LOG IN. (top right)
    If you can't remember your password, CLICK HERE to reset it. If you have questions, feel free to click the CONTACT US link at the bottom of this page.

For Sale: T.W.T. Double Miter Saw Du-Ma_Co. Manufacture

FrameReady Special Offer - Call 888-281-2202

klee

Grumbler in Training
Joined
Dec 29, 2020
Messages
2
Location
Austin, TX
Business
Four Corners Frame Shop
$950 - local pickup in Austin, Texas
or
you can arrange for a freight company to pick up.

In very good condition.

Includes 4 blades (the two in the box have been sharpened and not used). Is about 30 years old.

20A / 250 volt / Single Phase / Weight 480 lbs.

Pneumatic: Foot Pedal

Cuts tight joints. Can cut moulding up to 4 inches wide. Cuts wood, aluminum, and polystyrene moulding.

If local pick up, I will include left over picture frame moulding for free.

Open to offers. I decided to start ordering chopped as I don't have the space for the left over moulding. This is a great piece of equipment and has been a solid the whole time I've used it. No issues at all with the motors, the arms, or the measurements.
 

Attachments

  • Saw 1JPG.JPG
    Saw 1JPG.JPG
    101 KB · Views: 28
  • Saw 2.JPG
    Saw 2.JPG
    82.5 KB · Views: 26
  • Saw 3JPG.JPG
    Saw 3JPG.JPG
    85 KB · Views: 26
  • Saw 4.JPG
    Saw 4.JPG
    119.3 KB · Views: 27
  • Saw 5.JPG
    Saw 5.JPG
    218.8 KB · Views: 26
  • Saw 6.JPG
    Saw 6.JPG
    102 KB · Views: 25
  • Saw 7.JPG
    Saw 7.JPG
    193.3 KB · Views: 25
  • Saw 8.JPG
    Saw 8.JPG
    42.7 KB · Views: 28

RobertS

Grumbler in Training
Joined
Nov 15, 2018
Messages
3
Location
Dallas, Texas
Good afternoon.
Are the production stops included? I believe initial setup included a left and right production stop.
Thanks
 

klee

Grumbler in Training
Thread starter
Joined
Dec 29, 2020
Messages
2
Location
Austin, TX
Business
Four Corners Frame Shop
Hi there!

I purchased this from a frame shop that was going out of business back in '99. He was the original owner. He didn't include the production stops, however.

Warmest Regards,

Khris
 
Direct Contact Overlays DCO Book by James Miller
Top