Searching For Repro Kulicke frame

[wpfay]

Trying to replace a Kulicke brass plated frame from the 50's. The face is 5/32" and the side is 1". The metal thickness is probably measured in thousandths of an inch. Hence the problem. One of these takes a dive from the wall and the results are pretty much irreparable.
Smallcorp used to make these but quit about 5 years ago and they don't know of anyone still making them. Any leads would be appreciated.

 

[RParrish]

Wally are these the welded aluminum frames?

If so you can try A Street Frames http://www.astreetframes.com/



or



Gerlach Frames Inc
Street: 309 Nassau Avenue
Brooklyn, ny 11222-3704
Phone: (718) 486-8836

 

[wpfay]

They are like the welded aluminum, but with brass plated steel, or possibly solid brass. I checked A Street already, will look at Gerlach, thanks!

 

[Rob Markoff]

I think Jerry Solomon Enterprises in Los Angeles still does welded frames.

http://www.solomonframe.com/

Maybe Michael Kulicke can tell you something: (610) 588-6434