Neilsen Jersey Case Advice

  • Thread starter Thread starter Cliff Wilson
  • Start date Start date
C

Cliff Wilson

Guest
Ok, I bought two (which came quicker than my display model I ordered a wek ago) and loaded this am.

A couple of pointers ... Be careful sliding it out of the box! Lay it on a table face up and hold the cardboard away from the front as you slide it out. The cardboard marks the plexi. I got it out with some rub and buff elbow grease, but it's a pain!

Also, when you slide the plexi out, grab the "back side" (the side that you are not pulling) of the plexi and hold the middle up some as you pull it out. There is some rubber/(some soft material) on the moulding (magnet side) to protect the plexi, but a little drag and it lifts jsut enough for the adhesive on the backside to shmear on the inside of the plexi. More rub and buff.

The second one went fine.

Also, don't forget the Bumpons. There aren't any.

At their current price, they are interesting in VERY special circumstances, like I have now where the customer wants to change the Jersey over time. Or, if they can get the price point down to $99 instead of the $129 they might be more generically useful. Right now I'd say I can offer a better package at a price point so close that I thinkt he customer will opt for the better preservation.
 
Susan, you have to order direct from Nurre/NB.
They come in colors - Black is a color right?
UV Plexi, 32 x 40, easy to stick a sheet of matboard in the back, and hangers at the top.
 
Back
Top