FrameMakers
PFG, Picture Framing God
I finally got around to taking a picture of our new design counter.
[FONT=arial, helvetica, sans-serif]The counter is designed to have an old world feel and at the same time be functional. The base of the unit is made up of MDF that has been trimmed with Bead board and window casings that are commonly available at any Lowes or Home Depot. I wanted it to have a lot of visual depth so I added stair [/FONT][FONT=arial, helvetica, sans-serif]spindles and a brass foot rail so customers could safely get an extra few inches to see their framing design. The counter top is a half ton of poured concrete that we brought into the shop a bucket at a time. After pouring and screeding the top surface was troweled as smooth as possible and left to dry for a full week before removing the form. [/FONT][FONT=arial, helvetica, sans-serif] After the form was removed the surface was wet polished with varying grades of diamond polishing wheels. After we were satisfied with the smoothness of the counter top we used a dark brown paste wax to add a warm color and to seal it from moisture and stains. [/FONT]The back side of the counter has vertical slots for storage of finished frame projects and a place for the PC and printer. At the opposite end there are 2 mat racks that are on drawer slides. Once we started building the counter, we decided to flip the computer from the right to the left side. I never bothered to go back and redraw the plans.


[FONT=arial, helvetica, sans-serif]The counter is designed to have an old world feel and at the same time be functional. The base of the unit is made up of MDF that has been trimmed with Bead board and window casings that are commonly available at any Lowes or Home Depot. I wanted it to have a lot of visual depth so I added stair [/FONT][FONT=arial, helvetica, sans-serif]spindles and a brass foot rail so customers could safely get an extra few inches to see their framing design. The counter top is a half ton of poured concrete that we brought into the shop a bucket at a time. After pouring and screeding the top surface was troweled as smooth as possible and left to dry for a full week before removing the form. [/FONT][FONT=arial, helvetica, sans-serif] After the form was removed the surface was wet polished with varying grades of diamond polishing wheels. After we were satisfied with the smoothness of the counter top we used a dark brown paste wax to add a warm color and to seal it from moisture and stains. [/FONT]The back side of the counter has vertical slots for storage of finished frame projects and a place for the PC and printer. At the opposite end there are 2 mat racks that are on drawer slides. Once we started building the counter, we decided to flip the computer from the right to the left side. I never bothered to go back and redraw the plans.


