Resolved Mounting a card onto jersey

[Evubh]

I'm hoping to mount a card ontop of this jersey without using adhesive & for the mounting method to be concealed.
I can ask the customer for permission to use silicone & atg, or to simply not include the card on the front, but I'd like to see if there are any other options first.

I used a minor amount of adhesive (tape) to mount it to a mat board backing.
I was thinking that I could maybe make some channels in the mat to sew it on to the jersey but I'm not sure what would be the best way to go about it.

Any help appreciated! Thank you

 

[Bruce Papier]

Take a piece of matboard slightly smaller than the card, poke two holes in each corner of the matboard piece, stitch through the holes and through the jersey and backboard, and mount the card to the matboard piece.

 

[Evubh]

Take a piece of matboard slightly smaller than the card, poke two holes in each corner of the matboard piece, stitch through the holes and through the jersey and backboard, and mount the card to the matboard piece.

That's a great idea, thanks

 

[JFeig]

Rare earth magnets can be attached onto the verso side of the cards secondary backer that you added with apposing magnets under the first layer of the jersey.

 

[wpfay]

That is a document that doesn't need to be seen.
Why is it a part of the design?

 

[Ylva]

As Wally said, I would never show that in the design. Make a nice clear wrap for it and glue it to the back of the dustcover.

 

[Evubh]

That is a document that doesn't need to be seen.
Why is it a part of the design?

Because the customer wanted it to be. It's their order & their preference at the end of the day