For Sale: Morso Model F manual miter chopper


Grumbler in Training
Aug 15, 2020
Canastota NY
Karl’s custom framing
For Sale Used Morso Chopper, works perfectly.
$600 Pick up in Upstate/Central New York
comes with an extra set of blades

*** From the manufacturer:

Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)

Morso Model F mitering machine cuts double miter at 45° and single miter up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double miters very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimeter.

One centimeter of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

Morso F has a safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.

Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for
Morso Model F Mitering Machine
Double miter45°
Single miter up to90°
Cutting width, max.100 mm
Cutting height, max.160 mm
Square cutting65/65 mm
Measuring scale up to1,500 mm
Net weight90 kg


  • MorsoChopper.jpg
    169.6 KB · Views: 24
  • chopper left.jpg
    chopper left.jpg
    184.2 KB · Views: 26
  • chopper right.jpg
    chopper right.jpg
    175.3 KB · Views: 23
  • extendArm.jpg
    184.3 KB · Views: 25