FOR SALE
Used MORSØ-EH Guillotine Chopper DELUXE, 3-Phase Model
This is a fully automatic electric/hydraulic mitring machine, with a noise level below 70db - the perfect machine to cut picture mouldings in production - wooden, plastic and MDF mouldings.
EXCELLENT CONDITION
List: $13,250 (for 110 volt version) + extension table and measuring scale
Asking: $7500
Located in Evergreen, CO
Rotary Converter also available for purchase if interested. Please inquire.
Comes with:
• Extension Table on the left side
• Automatic rebate support and moulding clamps
• Measuring scale (in inches) with two adjustable stops - you can cut the short and long length of a frame without having to re-adjust the measurements
• Automatic cutting cycles for both large and small mouldings - which means that the machine always does the trim cut, which is very important
• Adjustable length of stroke ( 3 positions ) - when using the lowest cutting position the cutting cycle of two cuts only takes between 1 and 1.5 seconds
• Newly sharpened Standard Set of Blades
• Newly sharpened Reversible Set of Blades
• Manual
Technical Specifications
Double miter 45°
Single miter up to 90°
Cutting width max. 100 mm (4")
Cutting height max. 180 mm (7")
Square cutting 70/70 mm (2 3/4")
Measuring scale up to 1500 mm (60")
Motor, single phase 1, 1 kW
Motor, three phase 1, 1 kW
Pumping capacity 7 l./min.
Working pressure 80 bar
Power transmission 660 kilos
Tank contents 8 liter
Email (michele@mledoux.com) if you're interested, have questions or would like to see photos.
Serious inquiries only, please.
Thank you.
Michele
Used MORSØ-EH Guillotine Chopper DELUXE, 3-Phase Model
This is a fully automatic electric/hydraulic mitring machine, with a noise level below 70db - the perfect machine to cut picture mouldings in production - wooden, plastic and MDF mouldings.
EXCELLENT CONDITION
List: $13,250 (for 110 volt version) + extension table and measuring scale
Asking: $7500
Located in Evergreen, CO
Rotary Converter also available for purchase if interested. Please inquire.
Comes with:
• Extension Table on the left side
• Automatic rebate support and moulding clamps
• Measuring scale (in inches) with two adjustable stops - you can cut the short and long length of a frame without having to re-adjust the measurements
• Automatic cutting cycles for both large and small mouldings - which means that the machine always does the trim cut, which is very important
• Adjustable length of stroke ( 3 positions ) - when using the lowest cutting position the cutting cycle of two cuts only takes between 1 and 1.5 seconds
• Newly sharpened Standard Set of Blades
• Newly sharpened Reversible Set of Blades
• Manual
Technical Specifications
Double miter 45°
Single miter up to 90°
Cutting width max. 100 mm (4")
Cutting height max. 180 mm (7")
Square cutting 70/70 mm (2 3/4")
Measuring scale up to 1500 mm (60")
Motor, single phase 1, 1 kW
Motor, three phase 1, 1 kW
Pumping capacity 7 l./min.
Working pressure 80 bar
Power transmission 660 kilos
Tank contents 8 liter
Email (michele@mledoux.com) if you're interested, have questions or would like to see photos.
Serious inquiries only, please.
Thank you.
Michele