Help HELP!! my 6100 Fletcher wont go home

[lastboat]

I am in first few weeks of using a CMC 6100 and I had a jam and had to press the emergency stop.
How do I get the machine to reset its self?
The head wont go home.
thanmks

 

[blackiris]

ok...... carefully...... with the stops off........ push the arm back all the way to the left.
DO NOT lift the head...... it will get all screwed up.

when its back over to the left you should be able to undo the emergency stop and hit the enable button.

Hope this helps! You can call me if this doesnt work for you!

 

[lastboat]

ok...... carefully...... with the stops off........ push the arm back all the way to the left.
DO NOT lift the head...... it will get all screwed up.

when its back over to the left you should be able to undo the emergency stop and hit the enable button.

Hope this helps! You can call me if this doesnt work for you!

YES! that did it, back in business.
Thanks! May need to ask about a multi opening with layers sometime.!

 

[blackiris]

Sure no problem. Did you get the manual with the machine???

 

[lastboat]

Sure no problem. Did you get the manual with the machine???

I have what is on the paperframers web site. THere is a service manual, and cad manual.