• Welcome! You will have to REGISTER a free account, before you can access the system. If you already registered, please LOG IN. (top right)
    If you can't remember your password, CLICK HERE to reset it. If you have questions, feel free to click the CONTACT US link at the bottom of this page.
Hoffmann Dovetail Joining System

Gunnar 4001 XL CMC -- almost new

D

Damon Smythe

Guest
We are no longer doing framed art, and are selling a lightly used (10-20 hrs) top of the line Gunnar 4001 XL CMC mat cutter with Servo motor. Condition is almost-new, with light scratches on one side (see pic). Approx 100 cuts, exactly 2984.37 meters. Nobilis CPU with installed software included. We bought it last spring for $77,000, and are asking $60,000 or best offer. I am happy to discuss pricing.

The Gunnar 4001 is the fastest and most advanced mat cutting system available, with a speed of up to 2000mm/sec (78"/sec).

Key Features of the Gunnar 4001:

• Large work surface of 190cm x 125cm (74″ x 49″)
• Mat fixation by either countersunk clamps, vacuum fields or both
• Both 45° and 90° cutting heads
• Optimizes waste by cutting right to the edge
• Two cutting fields, operable alternately in COE mode for maximum output
• Four side all around cutting table operating access
• Ideal for large scale production, capable for 24 hour constant operation
• Highest processing speed available on CMC market today

We can make arrangements for packaging and shipping from Portland, OR. Crating and freight are additional. Please let me know if are interested.

Thank you.

Damon
damon@finic.com
503-863-1125
 

Attachments

D

Damon Smythe

Guest
Thread starter
***EDIT: Price lowered to $50,000***
 
D

Damon Smythe

Guest
Thread starter
***Please disregard previous miscommunication edit. Asking price is $60,000. Thank you for your interest.***
 

FrameShop1

MGF, Master Grumble Framer
Joined
Jan 5, 2008
Messages
674
We sold this Gunnar 4001 for him several weeks ago. We have several other CMC options available. Or, if you are looking for a Gunnar specifically, we can let you know what we are expecting in the near future. Feel free to call us at 330-405-9421

Visit us online at www.skylinepictures.com.

Used equipment catalog: http://skylinepictures.com/Used_Framing_Equipment.htm ... newest listings are located on the latter pages

New equipment catalog: http://skylinepictures.com/New_Framing_Equipment.htm

Feel free to call if you have any questions.

Thank you.:)

Steve




AIM Enterprises, Inc.

1899 East Aurora Rd.

Twinsburg, OH 44087

Phone: 330-405-9421

Web: www.skylinepictures.com
 
Advertise on the G, a forum for framers only
Top