Updated list of items for sale:
(Including updated pricing)
- VacuSeal 4468H heat/vac.press withstand 44"x68"(As seen in Larson Juhl catalog) New over $7000
- Fletcher 3000 60" wall mounted Glass/Mat/acrylic cutter
- Fletcher 2100 48" mat cutter with production stops and squaring jigs
- Circle Master cm2230 oval and circle mat cutter
- Cassese CS89 pnumatic v-nailer
- Jun-Air 6-X silent compressor(new cost over $1500)
-Phaedra 12" mitre system with Dewalt saw
- Two 100 tooth saw blades ($220 each new)
- AMP VN-2+1 pneumatic v-nailer with stand and brackets
- AMP Mite-True Disc Sander ($500 new)
- Frame Square Fillet Chopper
AMP Mitre-Mite VN-2+1 pneumatic V-Nailer with stand and side brackets
, Features frontal clamp for positive hold, adjust to fit almost any profile, personally, I never found one I could not join with this machine. Two stage pedal action allows you to check the alignment of the mouldings after the machine clamps them down, but before it shoots the v-nail. This machine has seen light duty for less than a year and is like new. I paid over $2000 for it counting the accessories. Asking price $1000.
VacuSeal 4468H Programmable combination Heat/Vacuum press with stand.
This is the best press made. Will mount and laminate. Perfect for high volume shops. Built like a tank. I purchased this press from another local frame shop that closed down a few years ago. It is in excellent condition, and aside from a few scratches, like new condition. This press purchased new will cost you over $7000. Asking $3999
Fletcher 2100 48" mat cutter, with production stops and squaring jigs.
Also like new. Anyone who already is in framing knows that these are the very best manual mat cutters made. Asking $800.
Fletcher 3000 Wall mount Glass-Mat-Acrylic Cutter.
There is no faster more precise way to cut mat or glass to the proper size. As with the Fletcher 2100, this is the best manual cutter available. Asking $1100.
Mitre-True Manual Disc Sander,
used to accurately true a corner and get a perfect joint every time. These were discussed on the grumble a while back as they were somewhat of a hot item. Well, let me tell you, they work great. I don’t know about choppers, never owned one, but with a saw, everyone knows that even with the best blades, the saw blade tends to wobble ever so slightly just enough to get a bevel on the top end of those tall mouldings, where the gaps will show the most. That is why I got this machine and I was not disappointed. Not even a year old and build like a tank, over-engineered is what they called it. Asking $325.
Jun Air 6-x completely silent air compressor.
(The same one as in your larson juhl catalog. This compressor is awesome, it really is silent, you can barely hear it humming when on. This compressor was built with the framer and his equipment in mind and is a perfect match for the pneumatic v-nailer. I purchased this machine fom a closed frame shop a few years ago. This guy was the original owner and his shop just never quite made it. Compressor is in excellent condition. Asking $900.
Phaedra mitre system with #12 Dewalt DW705 and two Ultra mitre 12# ax99 saw blades.
This system will easily cut 4" mouldings, maybe even larger. This system has been used for about two years and is in excellent condition. Included blades are $200 blades each. Asking $660.
Circle Master oval mat cutter with accessories instructions and video.
Built to last forever. I haven’t used this machine a whole lot, but it works fine. Asking $800
Cassese CS89 Pneumatic v-nailer Asking $800.
Misc items included if you purchase all: atg gun, framers point gun, 4 mat sample racks, tool box, joiner table, mat cutter table, saw table, daubers, putty, hand tools, wire & hangers, various tapes, storage bins, sticks of moulding (including a lot of Larson Juhl), glass, mats, foam board, and much more.
Sell all for $8725.
Sell: Vacu-press - Fletcher 2100 - Fletcher 3000 - Jun-Air - Circle Master - Cassese Joiner $6000
Also for sale for additional fee: several dozen archival print sleeves of various sizes, clear over black, with several sleeve racks.
Please contact: Sebastian at artrage@juno.com or call (850) 537-9934
(Including updated pricing)
- VacuSeal 4468H heat/vac.press withstand 44"x68"(As seen in Larson Juhl catalog) New over $7000
- Fletcher 3000 60" wall mounted Glass/Mat/acrylic cutter
- Fletcher 2100 48" mat cutter with production stops and squaring jigs
- Circle Master cm2230 oval and circle mat cutter
- Cassese CS89 pnumatic v-nailer
- Jun-Air 6-X silent compressor(new cost over $1500)
-Phaedra 12" mitre system with Dewalt saw
- Two 100 tooth saw blades ($220 each new)
- AMP VN-2+1 pneumatic v-nailer with stand and brackets
- AMP Mite-True Disc Sander ($500 new)
- Frame Square Fillet Chopper
AMP Mitre-Mite VN-2+1 pneumatic V-Nailer with stand and side brackets
, Features frontal clamp for positive hold, adjust to fit almost any profile, personally, I never found one I could not join with this machine. Two stage pedal action allows you to check the alignment of the mouldings after the machine clamps them down, but before it shoots the v-nail. This machine has seen light duty for less than a year and is like new. I paid over $2000 for it counting the accessories. Asking price $1000.
VacuSeal 4468H Programmable combination Heat/Vacuum press with stand.
This is the best press made. Will mount and laminate. Perfect for high volume shops. Built like a tank. I purchased this press from another local frame shop that closed down a few years ago. It is in excellent condition, and aside from a few scratches, like new condition. This press purchased new will cost you over $7000. Asking $3999
Fletcher 2100 48" mat cutter, with production stops and squaring jigs.
Also like new. Anyone who already is in framing knows that these are the very best manual mat cutters made. Asking $800.
Fletcher 3000 Wall mount Glass-Mat-Acrylic Cutter.
There is no faster more precise way to cut mat or glass to the proper size. As with the Fletcher 2100, this is the best manual cutter available. Asking $1100.
Mitre-True Manual Disc Sander,
used to accurately true a corner and get a perfect joint every time. These were discussed on the grumble a while back as they were somewhat of a hot item. Well, let me tell you, they work great. I don’t know about choppers, never owned one, but with a saw, everyone knows that even with the best blades, the saw blade tends to wobble ever so slightly just enough to get a bevel on the top end of those tall mouldings, where the gaps will show the most. That is why I got this machine and I was not disappointed. Not even a year old and build like a tank, over-engineered is what they called it. Asking $325.
Jun Air 6-x completely silent air compressor.
(The same one as in your larson juhl catalog. This compressor is awesome, it really is silent, you can barely hear it humming when on. This compressor was built with the framer and his equipment in mind and is a perfect match for the pneumatic v-nailer. I purchased this machine fom a closed frame shop a few years ago. This guy was the original owner and his shop just never quite made it. Compressor is in excellent condition. Asking $900.
Phaedra mitre system with #12 Dewalt DW705 and two Ultra mitre 12# ax99 saw blades.
This system will easily cut 4" mouldings, maybe even larger. This system has been used for about two years and is in excellent condition. Included blades are $200 blades each. Asking $660.
Circle Master oval mat cutter with accessories instructions and video.
Built to last forever. I haven’t used this machine a whole lot, but it works fine. Asking $800
Cassese CS89 Pneumatic v-nailer Asking $800.
Misc items included if you purchase all: atg gun, framers point gun, 4 mat sample racks, tool box, joiner table, mat cutter table, saw table, daubers, putty, hand tools, wire & hangers, various tapes, storage bins, sticks of moulding (including a lot of Larson Juhl), glass, mats, foam board, and much more.
Sell all for $8725.
Sell: Vacu-press - Fletcher 2100 - Fletcher 3000 - Jun-Air - Circle Master - Cassese Joiner $6000
Also for sale for additional fee: several dozen archival print sleeves of various sizes, clear over black, with several sleeve racks.
Please contact: Sebastian at artrage@juno.com or call (850) 537-9934