Reply to thread

Message: [QUOTE="Rick Hennen, post: 1139468, member: 23615"] Adhere the mirror to a sheet of 15MM Ultralight MDF cut to size. Since the OD of MDF sheets is 49 x 97, you will have no problem with the 42 x 96 size requirement. Then use heavy duty Z bars to mount it to the wall being sure to hit the studs with the screws. Two benefits using the Ultralight MDF - it is very flat and because it is Ultralight it is about 33% less in weight than standard MDF. It's also quite a bit lighter than plywood. Of course you will need to find a molding with a 7/8" deep rabbet. [/QUOTE]

Verification: "C.M.C." Stands for COMPUTERIZED _____________ CUTTER (one word answer)