For Sale - Closing My Shop in So. Cal.

[gingr]

Items are located in Orange County, CA. Shipping Available.

Brevetti Prisma CE Saw - - - - - - - - - - - - - - - - - - - - - - $3000
. . 5 years old, with 2 sets of 100T Ultrmitre Blades (16 months old)
. . More info: http://pamfast.com/frame/Saws/prismace.html
Jyden Chopper - - - - - - - - - - - - - - - - - - - - - - - - - - - - $750
. . Has 60" Right extension tables with Engraved Ruler and 31" Left extension table.
. . sets of Blades, and dust slide
. . Good working condition -- no problems. 18 years old
ITW Mitre Mite VN42 - - - - - - - - - - - - - - - - - - - - - - - - $1700
. . 5 years old, with 4 heads: 7,10,12,15
. . Stand has adjustable risers to level unit to appropriate height.
. . More info: http://www.itwamp.com/cpfvn42.htm
VacuSeal 4366M-HS Hot/Cold Vacuum Press w/ Stand - - - - - - $1300
. . 18 years old but Works Great. Bladder and seal replaced 18 months ago.
. . Gas Springs still work.
Kinetronics Electric Ionizing Air Gun - - - - - - - - - - - - - - - - $275
. . More info: http://kinetronics.com/store/iag.html
ITW Mitre Mite Disc Sander - - - - - - - - - - - - - - - - - - - - - $350
Delta Dust Collector (16 months old) - - - - - - - - - - - - - - - $150
Xylem wooden Art Bin, Black - - - - - - - - - - - - - - - - - - - - $200
http://www.xylemdesign.com/Easels/StoreFixtures/PrintBin.asp#
Molding Sample Spinner, 10 panels - - - - - - - - - - - - - - - - $200
2 - Molding Sample Spinners, 4 panels - - - - - - - - - - - - - - $100 ea
2 - Mat Storage Racks 62.5"W x 40.5"D - - - - - - - - - - - - - $300 ea

Call 949-300-5202 or PM

 

[CAframer]

Hey Ginger ... sorry to see you're closing ... if you have a moment give me a call ... or of course stop by any time ... in any event good luck with both the equipment sale and your future endeavors.

 

[canada framer]

s&h

Sorry to hear about that. Would you be willing to ship in Montreal?
An also how long are your extensions on each side? (brevetti)
Give a few details about it.
And of course i will be paying the s&h.

 

[CAGallery]

Sorry to hear about your shop closing.

Can you send more details on the ITW Mitre Mite Disc Sander (condition, age) and a photo.

Thanks.

 

[gingr]

Sorry to hear about that. Would you be willing to ship in Montreal?
An also how long are your extensions on each side? (brevetti)
Give a few details about it.
And of course i will be paying the s&h.

I don't know what it takes to get it across the border. If I could get some help with that, I would certainly be willing to send it. It will likely need to be crated to ship.

The extensions (measured from center of saw) are left 51", right 64.5". Each extension has a support leg. The cutting capacity of the saw is 4 ¾” wide by 2 ¾” high moulding. This link http://pamfast.com/frame/Saws/prismace.html says everything that I can think to tell you about specs. This saw has never seen heavy use, it is in great shape.

I have attached a photo.

 

[gingr]

ITW Mitre Mite Disc Sander

Sorry to hear about your shop closing.

Can you send more details on the ITW Mitre Mite Disc Sander (condition, age) and a photo.

Thanks.

The Disc Sander is about 5 years old. It is in great condition. The wheel is 12" diameter. I've attached a photo.

 

[gingr]

Dust Collector

The Dust collector is a Delta AP400. It is 16 months old.

 

[gingr]

ITW Mitre Mite VN-42

5 years old
4 heads 7, 10, 12, 15
Stand Included

Here's a photo: