DIY thermostat replacement

Create a Post
Judy,

The “Thermostat Installation” walk through should have been packaged with the thermostat itself.

If you don’t have it, send me your fax number and I’ll whip it over to you.
 
I used to get them from the Larson Tech Center, just give their Tech Line a call. It's not difficult, just unplug it first.
You'll get the hang of it quickly.
 
Even I was able to do this! Of course, I had to climb down from my workbench three times to make sure it was really unplugged before I cut the first wire. Felt like I was in the bomb squad!
 
You shouldn't have to cut any wires.

If you leave the unit plugged in, it's more exciting and a bit more challenging. It’ll leave you with a “tingling” feeling all over.

Been there; done that!
 
Give me a break! I rewired the thing over ten years ago! I was just trying to get across the "make sure it's unplugged" concept.

I followed the directions to the letter (don't remember where I put something I filed last week much less what those directions were) and I even talked on the phone to a tech guy from Seal.

I could have hired an electrician to do it but I figgered he's never read the directions and I trusted myself more! LOL!

PS - My press has been peachy keen since I rewired it - so whatever I did it was right!
 
Create a Post
Back
Top