• Welcome! You will have to REGISTER a free account, before you can access the system. If you already registered, please LOG IN. (top right)
    If you can't remember your password, CLICK HERE to reset it. If you have questions, feel free to click the CONTACT US link at the bottom of this page.
Rian Fabrication Services  www.rianfabrication.com

Diasec (facemount) silvering problem

Primaluce

Grumbler in Training
Joined
Nov 28, 2019
Messages
1
Hello everyone.

Im contributing from Istanbul. We start facemounting process recently. I have problems with the silvering. What should be done to avoid tiny bubble particules between the acrylic and the print after mounting¿Is it environmental temperature? Lack of adequate press of the rollers?(I use manual 130 cm roller btw) I used to print on Hahnemuehle Matte Fibre 200. But after having had silvering problem I changed the paper type to microporous 180gr glossy paper. It had less silvering but it had! Please show me a way to get rid of it
 
Register for the picture framer's grumble
Top