Daige products

[Slick]

I have been researching Daige products and they have a system called Rollataq motorized desktops, that will apply adhesive, that is non-sticky and can be repositioned up to 2 minutes, you just rub the material down and it permanently bonds in 15 minutes. It is acid free, non-toxic, non-yellowing and will not be effected by heat, humidity or aging. Would this be an alternative to the 3m Scotch pro spray system? Would this work for digital photos? Is it necessary to use a press with these types of adhesives? I read the pro spray system topic from 3-04 and it seemed to be divided on the use of a press.

 

[Dermot]

Welcome to the Grumble

Below are a few links to discussions on the Rollatag/Daige products
http://www.thegrumble.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=003645#000004

http://www.thegrumble.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=004360#000005

http://www.thegrumble.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=005409#000006

And a Link from the UK/Irish Grumble
http://estlite.scenes.biz/phpBB2/viewtopic.php?t=67
John (Merlin Framer) is a real "wizard" with the Rollatag system….

PS
I would also have a look at this link….it looks like good advise as to what direction the framing industry is taking…..I know, I know ……….decisions, decisions… good luck with your research…
http://www.thegrumble.com/ubb/ultimatebb.php?ubb=get_topic;f=11;t=000713

 

[Slick]

Thank you for the information , the links were very helpful.

 

[Dermot]

Slick

You are more than welcome….it’s nice when you get a response like you posted……thank you

Now….. to add to your decision making if you go to the Australian Grumble www.thegrumble.com.au
Go to the “Main Framing Forum” and the thread “3M ProSpray and Wallbuddies” thread started on 31/5/04 you will find some more reading….

Good luck.

 

[Slick]

Thank you for all your help. I am a newby at framing and this website is a wealth of information mainly due people like yourself that take the time to freely offer their knowledge. I just love this website.