Question Crescent Perfect Mount

[k2500guy]

If I'm gonna mount a photo using Crescent Perfect Mount, is there a reason I should use the PS3X and not the PSX? I'll probably back it up with a foam board anyway and the PS3X is more expensive. It was suggested to me to drymount the PSX to a foamboard. Any reason I shouldn't do that?

Bobby

 

[evartpat]

There is also PSFC...Foamboard Perfect Mount.

 

[Jerry Ervin]

There is no reason to mount the x board to foam core.

If you plan to use additional backing, the thinner version should work fine.

With the 3x, you don't need additional backing unless you just want to fill out the frame depth.

 

[Jerry Ervin]

There is also PSFC...Foamboard Perfect Mount.

I have tried that and it works good.

However, just like most all the other foam boards on the market it dimples easily.

 

[BILL WARD]

it dimples easily

and if it comes in damaged(pretty easily checked)---IT GOES BACK!

I get from LJ and they have the sense/experience to pack the stuff face to face helping to greatly eliminate the problem.

the only things you really MUST watch out for is cut it with a NEW blade & when you get it to the 'in place' position you need to kinda 'roll it down'..you get 1 shot at it! If you put a bubble, etc, in it at this point it aint ever gonna be right!(you just bought a replacement). As they say in cards---a card laid is a card played