ART on Canvas/wood
Entry #1
LJ 160bl
Studio 26968
Studio 26967
Studio 26957
LJ 382285
Canvas was 36 x 48, we did the stretch
Entry #2
(sorry, I cannot get these pictures to post at the moment, will post once the person who submitted sends it in a different format)
Here is the information:
1. Stack of three Larson-Juhl mouldings: #182112 5/8" Antique Silver Enhancer, #179022 1/2" Valagio Black, and #714892 3-3/8" Venezia Silver.
2. Matting not applicable.
3. 30 x 40 stretched canvas portrait of a state legislator.
4. The three-stack frame was designed to compliment the contemporary clean lines of the facility in which it was hung.
5. The moulding lip was lined with foam tape to provide a barrier between the moulding and the canvas, backed with 3/16 acid free foam core, and accented with a 1" x 5" black custom designed name plate from Sign Design.
Entry #3
This is a 12" square acrylic and collage on plywood. The inner frame is 2" wide and the outer cap is 2" deep. I painted both inner and outer frames to match the artwork - inner frame painted with acrylic and spray enamel - outer painted with acrylic - dry brushed in blue with yellow over top to make green/yellow/blue. Original art by Mark Freeland.
Entry #4
It is a simple floating frame. Fotiou 4000BL (31.125” x 25.125” allowing 0.5 inch reveal or shadow around the canvas). Other than that the special treatment is my ribbon treatment of the unfinished edge.
[ 07-02-2005, 12:33 AM: Message edited by: Lance E ]
Entry #1
LJ 160bl
Studio 26968
Studio 26967
Studio 26957
LJ 382285
Canvas was 36 x 48, we did the stretch

Entry #2
(sorry, I cannot get these pictures to post at the moment, will post once the person who submitted sends it in a different format)
Here is the information:
1. Stack of three Larson-Juhl mouldings: #182112 5/8" Antique Silver Enhancer, #179022 1/2" Valagio Black, and #714892 3-3/8" Venezia Silver.
2. Matting not applicable.
3. 30 x 40 stretched canvas portrait of a state legislator.
4. The three-stack frame was designed to compliment the contemporary clean lines of the facility in which it was hung.
5. The moulding lip was lined with foam tape to provide a barrier between the moulding and the canvas, backed with 3/16 acid free foam core, and accented with a 1" x 5" black custom designed name plate from Sign Design.
Entry #3
This is a 12" square acrylic and collage on plywood. The inner frame is 2" wide and the outer cap is 2" deep. I painted both inner and outer frames to match the artwork - inner frame painted with acrylic and spray enamel - outer painted with acrylic - dry brushed in blue with yellow over top to make green/yellow/blue. Original art by Mark Freeland.

Entry #4
It is a simple floating frame. Fotiou 4000BL (31.125” x 25.125” allowing 0.5 inch reveal or shadow around the canvas). Other than that the special treatment is my ribbon treatment of the unfinished edge.



[ 07-02-2005, 12:33 AM: Message edited by: Lance E ]