Choosing a Mat Cutter

Create a Post
T

the artist

Grumbler in Training
Joined
Mar 19, 2008
Posts
5
Hi,

I'm a visual artist who wants to start framing my own work.

I'm trying to choose between a used C&H or a used Ultimate Gold. Does anyone have a list of pros and cons for both that will make my choice easier?

The C&H is a bit cheaper but I'll pay a bit more if the Ulitmate Gold is worth it. I don't anticipate doing huge volume but I want a cutter that will present my work in a professional manner.

I would welcome any suggestions or comments.

Thanks,
the artist
 
I would suggest to see for which one is more easy to find parts. And blades. By design I like the Keencut better, since it has a metal base.
 
Mat cutter

I am very happy with my Logan Compact which will handle matboard up to about 29". I would have gone one level higher had I been thinking I was really going to do all my mats. It came with instructions on use and a CD. This product is readily available at Hobby Lobby, Joann's, Michael's and all art stores as well as on line. Hobby Lobby (register online for weekly coupons...usually 40% off)Joann's and Michael's have frequent coupons for 40% in the newspaper. Go to both sites and register to receive their weekly ad. Joann's does an online coupon while Michael's only does the newspaper.
You can view the 3-4 cutters Logan makes at their website which you should easily find in a search. OR go to MisterArt.com and see all the cutters Logan makes. They are not the best for ordering, though, due to the coupons available from the other mentioned stores.
Unless you are going to be handling heavy volume, this is a good cheap way to go and the product they use in the backroom at Joann's. I think my compact cutter cost me about $45 with the coupon.
 
I've been using a 40" Keeton since I bought it used in 1980 or so. I just got a 48" Keeton in like new condition off eBay for $350.00 including shipping. If you can find one, they're the best designed cutters ever, and with proper care, should last a lifetime
 
metal base - does it really matter?

Hi,

The old C&H 40' that I'm interested in has a particle board base. The Ulimate Gold Keen Cut that I'm also looking at has a metal base.

Does the base really make a difference?

Are both cutters easy to maintain and get parts for?

Thanks,
the artist
 
Create a Post
Back
Top