Opinions Wanted 1/4 MASONITE IN MY DMT PRESS

Lori Drugan

SGF, Supreme Grumble Framer
Joined
Sep 8, 2004
Messages
1,430
Location
Fairlawn, OH
In all my 12 years with my Vacu Seal Press I've never had this request to adhere print guard to a piece that has already been put on 1/4 inch masonite and I'm concerned it may damage the bladder in the press. Are my concerns warranted or am I safe in doing this?

Thanks for your input.

Lori
 

MIK

SGF, Supreme Grumble Framer
Joined
Feb 17, 2006
Messages
2,660
Location
Pueblo, Colorado
Business
Classic Corner
I've done it with no problems. I have 40x60 inch release boards in my press, so I just put the masonite between the two board and turned on the press. Had to increase the dwell time but lowered the pressure a tad.
 

Lori Drugan

SGF, Supreme Grumble Framer
Thread starter
Joined
Sep 8, 2004
Messages
1,430
Location
Fairlawn, OH
Thanks Mik. I considered doing the same thing, but wanted some one to validate my idea before I damaged the old gal before her time.

Lori
 
Top