Looking for Moulding

[carladea]

Help, PLEASE. I have a customer looking for a shadow box frame (a lot of them, actually) that is at least 2.25" deep, about 1/2" on the face, a natural wood, and plain and simple. Everthing I have is either too shallow or too fancy. Can anyone help with suggestions? Thought I'd ask the experts here before seaching on my own.

Thank You! graemlins/shrug.gif

[Framerguy]

Hi Carladea,

These aren't super generic plain but there isn't any compo or other "window dressing" on these 2 styles of moulding and both have extenders available. Both start out at about 2 1/4".

AGF #630 (Honey ash color) solid ash roundover top, slight offset about half way down the outside of the moulding.

Gemini #G-694 Kind of a medium honey maple finish, same type of roundover top and a reverse scoop dropping into a straight side on the profile.

I don't know if these companies have websites but you could call them for samples:

Gemini - 800-323-3575
AGF - 800-332-2467

Good luck.

Framerguy

[B. Newman]

You might try Xylo. Lots of profiles, unfinished or stain finished. Oak, ash, poplar, walnut, etc... 800-627-5040

Betty

[carladea]

Thanks for the info. I will start making phone calls in the morning. I knew someone could help!

[MerpsMom]

I thought Studio used to have some profiles like that. However, they seem to be much faster on the droplisting than previously, so maybe not. They helped me with something similarly shaped before.

[Lance E]

If you're after lots of it then why not design one and have a manfacturer process it?

[beerhere]

look into picture woods out of colorado. They have a wonderful product and will customize if you need.

[Kit]

Does it have to be wood?

Designer Mouldings makes quite a nice deep shadowbox moulding. It's available in black, silver and gold - very clean lined.

Kit

[tom davis]

Syracuse Sales Ltd has some nice shadow box molding made by there parent company PBH, both chop and length. They are nice people to work with and I'm sure they can fill your needs. tom davis

[David N Waldmann]

We have a 3/4" face by 2-1/4" deep natural wood moulding available. It is a square cap and availble in Ash, Cherry, Mahogany, Maple, Oak and Walnut. It comes raw or finished.

We can also make a custom variation with a 1/2" face if you must have it that narrow.

David
Vermont Hardwoods (http://www.vermonthardwoods.com)
Chester, VT
888 442-7396